NEW

Exciting new tools are live – check them out now! Learn More

Choosing Wood for Boatbuilding: Cedar, Mahogany, Okoume and More

Choosing Wood for Boatbuilding: Cedar, Mahogany, Okoume and More

Wood is still one of the best boatbuilding materials ever used. It’s stiff and light for its weight, workable with hand tools, and beautiful. But not every species belongs in a boat, and the right choice depends on where in the boat it’s going.

What makes a good boat wood?

Builders look at a handful of properties: decay resistance, strength and stiffness for the weight, how well the wood holds fasteners and glue, how it bends, and how stable it stays as moisture changes. No single species wins on all of them, which is why traditional boats often mix several.

Common choices and where they go

Western red cedar

Light, easy to work, naturally rot-resistant, and pleasant to smell in the shop. It’s the standard for strip-planked canoes and kayaks. It’s soft, though, and dents easily, which is why strip hulls are usually sheathed in fiberglass.

White oak

Strong, heavy, and good for steam bending, so it’s a traditional choice for frames, keels and stems. White oak has closed pores and better rot resistance than red oak, which has open pores that wick water. Don’t substitute red oak for white in a boat.

Mahogany

The name covers several species, and quality varies widely. Good mahogany is stable, works beautifully, and finishes well, which is why it shows up on classic runabouts and trim. Be aware that some true mahoganies are restricted in international trade, so buy from suppliers who document their sources.

Douglas fir

Strong and widely available in North America, often used for spars, planking and structural parts. Look for vertical-grain, clear stock for boat work.

Teak

Famous for decks and trim because its natural oils resist rot and weathering. It’s expensive, and sourcing has become complicated, so many builders now use alternatives or reserve teak for small pieces.

Marine plywood

Marine plywood is made with waterproof glue and veneers without the internal gaps found in ordinary plywood. Gaps trap water and lead to rot, so it’s worth the extra cost. Okoume is a popular face veneer because it’s light and bends well, which makes it a favorite for stitch-and-glue boats. Meranti plywood is heavier and harder.

Look for plywood certified to a recognized marine standard. In much of the world, the British standard BS 1088 is the common reference. Exterior-grade plywood from a home center is not the same thing, even if the label says “waterproof glue.”

A note on moisture

Wood should be properly dried before you glue it with epoxy. Wet wood won’t bond well, and sealing moisture in leads to trouble. Let new stock acclimate in your shop for a while, and if you can, use a moisture meter.

Leave a Comment